Addition Molding Silicone for crafts

FOB Price

US $6.90
100 - 40,000 kilogram
US $6.20
40,001 - 999,999 kilogram

group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-E25 HY-E630 HY-E642
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:54:01 GMT

contact supplier

Paramtents

color transparent
payment TT /LC /West union
certificates Rohs,Msds,Sgs,ISO9001:2000
mix 1:1 or 10:1
promotion over 500KG 2% discount
environmental protection yes
features good tension,low viscosity, suitable hardness
material liquid silicone with two part
usage mould making for crafts
samples valuable

Packging & Delivery

Min Order100 kilogram

Briefing

addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional flui

Detailed

Addition Molding Silicone for crafts

Applications

HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, crafts ,gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E642# molding silicone

Model	HY-E642#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	30 - 40
Curing time (Mins 25°C)	120 - 240
Curing time (Mins 60°C)	20 - 30
Hardness (A°)	42±2
Density ( g/cm 3 )	1.08
Viscosity (CS) (Part A)	30000 ± 5000
Viscosity (CS) (Part B)	5000 ± 500
Viscosity (CS) (After mixed)	10000 ± 2000
Tensile-strength( kgf /cm2 )	100 ± 20
Tear-strength (kgf /cm2 )	15 ± 2
Elongation-break(%)	350 ± 20
Shrinkage(%)	≤0.1

OPERRATING INSTRUCTION of HY-E642# molding silicone:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.

For more information, please feel free to contact with Mr Wenson:
TEL: 0086-755-89948019
FAX: 0086-755-89948030
MOBILE: 0086-18938867531

skype: wensona

E-mail:hyb(at)szrl(dot)net

website:www(dot)szrl(dot)net