platinum cured silicone for mold making in FDA grade

                                                               platinum cured silicone for mold making in FDA grade

platinum cured silicone for mold making in FDA grade  application

It's mainly suitable for cake mold , candy mold , chocolate mold and any food grade product mold making &  for concrete, gypsum , soap mold making

platinum cured silicone for mold making in FDA grade  description

it's is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

platinum cured silicone for mold making in FDA grade   advantage

 * low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 )

*good fluidity easy for pouring operation

platinum cured silicone for mold making in FDA grade  operation

1.Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

2. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

3.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Notice : As our E-series silicone is platinum cure silicone , which is very easy to cause cure inhibition , so pls do remember thoroughly clean the model and tool before operation . Besides , pls avoid the liquid E-series silicone contact or mix with the following material , otherwise the silicone won't be cured :

1.Liquid condensation silicone ( condensation silicone not completely cured or organic tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials and materials contains phosphorous , nitrogen ,tin,lead .
4 .Pewter solder flux.

platinum cured silicone for mold making in FDA grade  shelf life

 8-10 months when stored under 24°C in original unopened packages.

platinum cured silicone for mold making in FDA grade   packing

 Packed in 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.

Any other information needed , pls feel  free to contact Shirley

0086-755-89948019 and mobile 0086-15220170905/18938867596

 Welcome to our website www dot szrl dot net