100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:04:25 GMT
color transparent
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring
hardness 20 shore A
Mixing proportion of curing agent (%) 4%
Operating time (mins 25 0C ) 40
Curing time(hours 25 0C) 3~4
Density ( g/cm 3 ) 1.08
Viscosity (mPas @ 25 0C) 13000~15000
Min Order100 kilogram
Descriptions of Condensation Cure Liquid Silicone Rubber For Tyre Molding
Condensation Cure Liquid Silicone Rubber For Tyre Molding is a kind of silicon rubber for PU/poly resin, unsaturated resin, plaster, candles and gypsums crafts, toys, soap, statuary ,casting molds making,etc.
FEATURES of Condensation Cure Liquid Silicone Rubber For Tyre Molding
Two-part silicon rubber: flowable liquid silicon and curing agent.
Cures at room temperature within 4-5 hours.
An exceptional fluidity and good operability, easy to demold.
Good tensile and tear strength, low shrinkage.
Technical Parameters of Condensation Cure Liquid Silicone Rubber For Tyre Molding
Model | 620# |
Appearance | adjustable |
Mixing proportion of curing agent (%) | 4% |
Operating time (mins 25 0C ) | 40 |
Curing time(hours 25 0C) | 3~4 |
Hardness (A°) | 20±2 |
Density ( g/cm3) | 1.08 |
Viscosity (mPas @ 25 0C) | 13000~15000 |
Tensile-strength(kgf /cm2) | ≥36 |
Tear-strength (kgf /cm) | ≥23 |
Elongation-break(%) | ≥ 440 |
Retractility(%) | ≤0.3 |
Operation instruction of HY-E Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 100:4 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
SHELF LIFE:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.