Platinum cured silicone rubber for shoe insole making

                                                                            platinum cured  silicone rubber for shoe insole making

Platinum cured  silicone rubber for shoe insole making application:

silicone rubber is mainly used for shoe insole making 

Platium cured   silicone rubber for shoe insole making  feature:

1. Good characteristics of easy-operation

2. Light viscosityand good fluidity

3. Low shrinkage

4. Favorable tension

5. No deformatio

6. flexible

7. High temperatureresistance, acid and alkali-resistance and ageing resistanc

Using Instruction of  platium cured silicone rubber for shoe insole making  

1.Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

2. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

3.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the vacuumed mixture into the model frame from the side of the mold frame

platium cured  silicone rubber for shoe insole making  storage

Shelf life : around 8 monthes storage under cool and dry place

Plantium cured   silicone rubber for shoe insole making  packing

20 kg /drum for part A + 20 kg/drum for part B

Any other information needed , pls feel free to contact Shirley 

 Tel:0086-755-89948019

 mobile: 0086-15220170905/18938867596

 Or mail:hyh(at)szrl(dot)net

 Welcome to our website www dot szrl dot net