500 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order500 kilogram
brand nameHong Ye silicone rubber
modelTB0330
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:05:49 GMT
Type Solvent Based Ink
Printing Type Screen Printing
Application screen printing
Color customized
Mix ratio 1:1
Pot life 12-24 hours
Curing time 10~20(mins)
Hardness 30±2
Shelf life 8-10 months
MOQ 500kg
Sample available
Certificate ROHS ISO
Min Order500 kilogram
T-shirt screen printing liquid silicon rubber manufacture shenzhen
In order to substitute the PVC ink people now use, which pollutes environment, we developed theenvironment friendly silicone ink, which does no harm to human body.When test and destroy ester of phthalate acid of PVC INK, producing outburst material will cause environmental problems. So PVC ink products are prohibited to use in America and Europe. The silicone ink our company produced is developed based on safety design.The silicone ink will be adhered on textile fiber well after being cured and forms elastomer of silicone . Therefore, it is its merit that it produce high tear strenth, which will create high quality printing effect.It is difficult for the silicone ink we now using to fluidity and cure quickly. So there are a lot of problems during application. However, the silicone ink our company produced not only makes up forthese shortcomings, but also activates the merits of heat resistance, recovery capacity, flexibility, velvet, resistance to oil,solvent,and other chemical etc, which are only possessed by silicone elastomer. That turns the harm to human body caused by the organic solvent into environment friendly, innoxious ink, which become highest quality textile elastic silicone ink.
Specification:
-Low shrinkage(<0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof, wash-resistant, high temperature resistant
-Non-toxic and odorless, food grade silicone
-High transparency and good tear-strength.
Datasheet:
Model | TB0330 |
Appearance | Transparent |
Hardness(shore A) | 30±2 |
Mix ratio(A:B) | 1:1 |
Viscosity(mPa.s) | 60000~100000 |
Tensile strength(Mpa) | 4.6 |
Tear-strength(KN/m) | 19±2 |
Elongation(%) | 360 |
Pot life/working time(25°C) | 12-24 hours |
curing time(100-120°C) | 10~20(mins) |
Operation introduction:
1,Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2,It can be cured by heating with 100~150 degree, the curing time will be 5~10 minutes.
SHELF LIFE:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
Any questions, please feel free to contact kelly:
TEL: 086-755-89948019
FAX: 086-755-89948030
MOBILE:086-18690907219
Website: www(dot)szrl(dot)net
E-MAIL: hyjm(at)szrl(dot)net
Skype:kelly619106
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.