silicon forefoot insole
- US $14.00
200 - 40,000 kilogram
- US $10.00
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE625 silicone rubber
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 18:14:16 GMT
Paramtents
state liquid
color translucent or clear
sample available
operation way pouring
feature 5 shore A
feature 1 high tensile strength
feature 2 high tear strength
feature 3 comfortable
feature 4 medical grade
feature 5 technical service provide
Packging & Delivery
Min Order200 kilogram
Briefing
manufacturer of silicone for shoes
soft and comfortable silicone insoles
Detailed
FEATURE of silicone forefoot insole :
1. silicone shoe insoles making is Two-part silicon rubber
2. silicone shoe insoles making can both cured at room temperature within 2-4 hours or cured under heated
3.soft and comfortable silicone insoles
4.Transparent and translucent silicone are available
Parameter of silicone forefoot insole
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( shore A ) | Tensile-strength (kgf/cm2 ) | Tear-strength (KN/m) | Viscosity after mixed (cps) | Shrinkage rate (%) | Elongation (%) |
E625 | Translucent | 1 : 1 | 30-40 | 6-8 | 25±2 | ~60 | ~14 | ~8000 | ≤0.1% | ~400% |
Operation of silicone forefoot insole
1.Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
2. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .
3.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the vacuumed mixture into the model frame from the side of the mold frame .
For more information about liquid silicone rubber, please feel free to contact with omiga
Mobile:86-18938867575
TEL: 86-0755-89948294
FAX: 86-0755-89948030
E-mail:hyjw(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime.
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents