100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:15:37 GMT
color white/ off-white/ blue/ red
HS. Code 39100000
Purity 100%
Appearance Liquid
Application Silicone Rubber for Tire Outer Molds
Sample Free
Catalyst 4% free of charged
MOQ 100KGS
Molding method Pouring , brushing
Certification SGS, RoHS, MSDS, FDA, REARCH, ISO9001:2000
Min Order100 kilogram
Silicone Rubber for Tire Outer Molds
Silicone Rubber for Tire Outer Molds Description
Silicone Rubber for Tire Outer Molds could be mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.
Silicone Rubber for Tire Outer Molds is has been used for years to make tire pattern molds .
Silicone Rubber for Tire Outer Molds Characteristics
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Silicone Rubber for Tire Outer Molds Notice
As Tyre Molding Silicone Rubber is platinum cure silicone , which is very easy to cause cure inhibition , so pls do remember thoroughly clean the model and tool before operation . Besides , pls avoid the liquid E-series silicone contact or mix with the following material , otherwise the silicone won’t be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
Silicone Rubber for Tire Outer Molds Technical Parameters
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
More details of Silicone Rubber for Tire Outer Molds, pls feel free to contact Ms Taylor:
Tel:086-755-89212380
Mob:0086-18938867522
Skype: taylordl828
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.