Additional liquid silicone rubber
- US $15.80
200 - 40,000 kilogram
- US $8.50
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E635# Silicone Rubber
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 18:15:58 GMT
Paramtents
Classification Catalyst
CAS No. 3910 00000
Other Names silicon rubber
Purity 100%
Application for mold making,accorfing to customers requirements
Certificate FDA SGS RoHS
color customized
sample avaliable
Hardness 35±2
Mix ratio 1:1 or 10:1
Curing time 2-4h
Operating time (Mins 25°C) 30-50
Shelf life 6-8month
Viscosity (CS) (After mixed) 10000 ± 2000
Packging & Delivery
Min Order200 kilogram
Briefing
food grade and ecofriendly
Detailed
Additional Liquid Silicone Rubber
Description
HY- E635# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.
Applications,
HY- E635# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, prototyping,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of HY-E635# molding silicone
Model | HY-E635# |
Appearance | Translucent or white |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 50 |
Curing time (Mins 25°C) | 2-4h |
Curing time (Mins 60°C) | 4-5 |
Hardness (A°) | 35±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 50 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E635# molding silicone:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
More information about mold making silicone rubber for plastercrafts please feel free to contact Ms. Sarah:
Tel: 0086-755-89948013
Cell: 0086-13620974715
email:hysc(at)szrl(dot)net
skype:sarah_leung
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents