manufacture of crafts Injection Molding liquid silicone rubber

FOB Price

US $12.80
200 - 40,000 kilogram
US $5.80
40,001 - 999,999 kilogram

group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:20:24 GMT

contact supplier

Paramtents

Shaping Mode Silicone Mould
Product Material silicone
Product Household Product
model HY-E620
usage injection mold making
color customized
MOQ 200KG
sample available
payment T/T W/U L/C
origin China
certificate FDA EU /RoHS Standard
delivery within 3 working days
shipping by sea/air

Packging & Delivery

Min Order200 kilogram

Briefing

1.good operation
2.None deformation
3.low shrinkage

Detailed

manufacture of crafts Injection Molding liquid silicone rubber

HY- E620# Addition Molding Silicone

Description of crafts Injection Molding liquid silicone rubber

HY- E620# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA molds application.

Applications of crafts Injection Molding liquid silicone rubber

HY- E615# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, cake molds,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E620# crafts Injection Molding liquid silicone rubber

Model	HY-E620#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	20-30
Curing time (Mins 25°C)	2-3h
Hardness (A°)	20±2
Density ( g/cm 3 )	1.08
Viscosity (CS)	6000 ± 2000
Tensile-strength( kgf /cm2 )	25 ± 2
Tear-strength (kgf /cm2 )	20
Elongation-break(%)	380 ± 50
Retractility(%)	≤0.1

Operation of HY-E620# crafts Injection Molding liquid silicone rubber ,

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .