Addition cured molding silicone rubber for delicate crafts

Addition cured  molding silicone rubber for delicate crafts

HY- E600# Addition Molding Silicone

Description of Addition cured  molding silicone rubber for delicate crafts

HY- E600# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making  masks, arms, legs, and other FDA molds application.

Applications of Addition cured  molding silicone rubber for delicate crafts ,

HY- E600# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E600# molding silicone

OPERRATING INSTRUCTION of HY-E600# Addition cured  molding silicone rubber for delicate crafts :

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail,  200kg/pail.

Anymore information about addition cure silicone rubber, please feel free to contact Miss Sarah.

TEL: 0086-755-89948013

Mobile: 0086-15889446131