200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-620# Silicone Rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:23:49 GMT
Classification Catalyst
Application Mould Making Materials
colour accorfing to customers requirements
certificates FDA SGS RoHS
appearance two parts fluid
sample free
package 25kg/drum
HS code 39100000
shelflife 12month
Port shenzhen
applicatin tire mold making
Min Order200 kilogram
Low shrinkage and no deformation silicone for tire molding
Description of Low shrinkage and no deformation silicone
Low shrinkage tire molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Typical Applications of Low shrinkage and no deformation silicone
Low shrinkage tire molding silicone could be mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.
Low shrinkage tire molding silicone is has been used for years to make tire pattern molds .
Characteristics of Low shrinkage and no deformation silicone
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Low shrinkage and no deformation siliconeTechnical Parameters
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
More details of Low shrinkage tire molding silicone, pls feel free to contact Ms Sarah:
Tel:086-755-89948019
Mob:0086-13620974715
Skype: sarah_szrl
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.