low shrinkage platinum addtion silicone for tire mold

  low shrinkage platinum addition silicone for tire mold

Description of  low shrinkage platinum addition silicone for tire mold

low shrinkage platinum addition silicone for tire mold, which is used for precision casting of tyre mold and reproduction of gypsum tyre molds.

Features of low shrinkage platinum addition silicone for tire mold :

HY-E620# tyre molding silicone rubber is used in pouring (wrapping) way to make molds, and is with the hardness of about 20 shore A. Thus it is with advantage of low viscosity, good fluidity, good operability ,easy to release bubbles, excellent tensile and tear strength, easy for pouring, and what’s more, it is in blue, thus it is very easy to distinct the delicate patterns of the tyre molds.

OPERRATING INSTRUCTION of HY-E620# low shrinkage platinum addtion molding silicone for tire mold:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail+20kg/pail,  200kg/pail+200kg/pail.

EXCHAGE RATE: 1 USD = 6.1 RMB

PLACE OF ORIGINE: Gongdong, China

Any questions about low shrinkage platinum addtion silicone rubber for tire mold, please feel free to contact Ms Judy

TEL: 086-755-89948019

FAX: 086-755-89948030

MOBILE:086-18938867591

QQ: 18938867591

Skype: judy.zhao723

WEB: www dot szrl dot net