200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E635# Good price Silicone for Mold Making
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:25:22 GMT
color white
sample free
Model HY-E635
application for mold making
mix ratio 1:1
Appearance Translucent or white
Curing time 2-4h
Hardness (A°) 35±2
Density ( g/cm 3 ) 1.08
Viscosity (CS) (After mixed) 10000 ± 2000
Min Order200 kilogram
platinum-base silicone rubber for artificial stone mold
Description
HY- E635# platinum molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.
Applications,
HY- E635# platinum molding silicone could be mainly used for making concrete stones, art foundry , PU molds, prototyping,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of HY-E635# molding silicone
Model | HY-E635# |
Appearance | Translucent or white |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 50 |
Curing time (Mins 25°C) | 2-4h |
Curing time (Mins 60°C) | 4-5 |
Hardness (A°) | 35±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 50 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E635# molding silicone:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail, 200kg/pail.
Any questions, please feel free to contact sarah:
MOBILE:086-13620974715
E-MAIL: hysc(at)szrl (dot)net
Skype:sarah_szrl
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.