200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E620 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:27:23 GMT
Certifications: RoHS.MSDS.SGS ISO9001:2000
Color transparent
brand hongye
model E620
MOQ 200kg
quality like wacker
usages tyre molds
materilas silicone rubber
sample free
type addition silicone
Min Order200 kilogram
silicone rubber for tyre molds manufacturer
silicone rubber for tyre molds manufacturer Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
silicone rubber for tyre molds manufacturer feature
1. silicones of tyre mould with Flowable liquid silicon and curing agent.
2. silicones of tyre mould with At room temperature within 6-8 hours.
3. silicones of tyre mould with An exceptional fluidity and good operability, easy to demold.
4. silicones of tyre mould with tensile and tear strength, low shrinkage.
5. silicones of tyre mould with High duplication times.
silicone rubber for tyre molds manufacturer Description
HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
HY-E620 Silicone Rubber is has been used for years to make tire pattern molds .
silicone rubber for tyre molds manufacturer Characteristics
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
silicone rubber for tyre molds Technical Parameters
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
, we should take the proper silicone rubber to make the mold for suitable products.
Need any help on silicone rubber, please feel free to contact Ms Annie :
Tel: 0086-0755-89948294
Mob:0086-0755-18938861891
E-mail: hyjx(at)szrl(dot)net
skype: annie2012a
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.