100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHy 528#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:29:47 GMT
Application Mold making silicone rubber
H.S. code 39100000
Shelf life 12 months
Appearance Liquid
Curing agent / Catalyst 4% for free of charged
Mixing ratio 100:5 / 100:4/ 100:3
Sample Free
Package Vacuum packing
Certificate FDA,SGS, RoHS, MSDS, ISO9001:2000
Min Order100 kilogram
Tyre mold making silicone rubber for your choice
1. Tyre mold making silicone rubber Advantage :
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
2. Tyre mold making silicone rubber Description
Tyre mold making silicone rubber is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
3. Tyre mold making silicone rubberTypical Applications
Tyre mold making silicone rubber could be mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.
Tyre Molding Silicone Rubber is has been used for years to make tire pattern molds.
4. Tyre mold making silicone rubber Technical Parameters
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
5. Tyre mold making silicone rubber Operation instruction
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
6.packageof Tyre mold making silicone rubber
Any question abt Tyre mold making silicone rubberplease feel free to ask Aimee:
Tel: 86-755-89948158
Mob: 86-18938867541
Email:hysz(at)szrl(dot)net
kype:aimee055722
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.