200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:30:17 GMT
color as request
sample available
mix ratio 1:1
hardness 10-40 shore A
HS code 3910 0000
shelf 10 months
package 20kg and 200kg per drum
Certification ROHS.MSDS.SGS ISO9001:2000
operation pouring
MOQ 200kgs
Min Order200 kilogram
Types of tire mold silicone
Types of tire mold silicone Description
Types of tire mold silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Types of tire mold silicone Typical Applications
Types of tire mold silicone could be mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.
Types of tire mold silicone is has been used for years to make tire pattern molds .
Types of tire mold silicone Characteristics
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Types of tire mold silicone Technical Parameters
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
Types of tire mold silicone Operation instruction
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Company Profile
We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers,
special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulants and potting compound,
addition cure liquid silicone,baby nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber,
HTV silicone rubber, lead-zinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber,
RTV-2 silicone rubber, silicone molds, silicone products,etc.
silicone rubber package details
silicone rubber certifications:
SGS
ROSHS
FDA
ISO900
We can provide good solution for you , if you have question about how to make silicone mold , or how to use the silicone mold ,and any problem about the silicone mold , pls kindly feel free to let us know , we will be happy to serve you.
Any questions of types of tire mold silicone, please feel free to contact Kaimi:
MOBILE:0086-18938867528
E-MAIL: hyju(at)szrl(dot)net
skype:hyjiangying
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.