price addtion liquid silicone rubber for mold making
- US $13.80
200 - 40,000 kilogram
- US $9.40
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE620
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 18:31:34 GMT
Paramtents
HS code 39100000
MOQ 200kgs
color white
Model No E625
features liquid
shelf life one year
normal packing 25kg/drum
delivery within 3 days
demould time ` 2-4hours
mix ratio` 1:1
Packging & Delivery
Min Order200 kilogram
Briefing
Low Viscosity, good operability
non deformation
excellent tensile and tear strength
Detailed
price addtion liquid silicone rubber for mold making application:
E620 is a kind of liquid silicone rubber.It's liquid with moderate viscosity and can be poured and brushed.The mold made out of the silicone and curing agent,which with high temperature up to 250-300°C,has dimension stability,low linear shrinkage.It’s a two-component material with mixing ratio of 10:1,and it’s used for soft mold making,etc.
OPERRATING INSTRUCTION of HY-E-620 liquid silicone rubber:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumize , you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Models of price addtion liquid silicone rubber for mold making
| Model | E615 | E620 | E625 |
| Appearance | Translucent | Translucent | Translucent |
| Mixing Ratio | 1: 1 | 1: 1 | 1: 1 |
| OperateTime(Mins25° C) | 2~3 | 2~3 | 2~3 |
| CuringTime (Mins 25° C) | 30 | 30 | 30 |
| Hardness (A° ) | 15± 2 | 20± 2 | 25± 2 |
| Density ( g/cm 3 ) | 1.08 | 1.08 | 1.08 |
| Viscosity (CS) (Part A) | 10000 ± 2000 | 20000 ± 2000 | 22000 ± 2000 |
| Viscosity(CS)(Part B) | 5000 ± 500 | 5000 ± 500 | 4000 ± 500 |
| Viscosity (CS) (After mixed) | 12000 ± 2000 | 12000 ± 2000 | 10000 ± 2000 |
| Tensile-strength( kgf /cm 2 ) | 35± 5 | 46± 5 | 44± 5 |
| Tear-strength (kgf /cm ) | 10± 2 | 11± 2 | 12± 2 |
| Elongation-break(%) | 430 ± 50 | 460 ± 50 | 490 ± 50 |
| Retractility(%) | ≤ 0.1 | ≤ 0.1 | ≤ 0.1 |
Our factory
Any question about price addtion liquid silicone rubber for mold making , pls free to ask Ms Maggie.
Mobile: 0086-18938867501
Tel: 0086-755-89212380
Fax: 0086-755-89948030
E-mail: szsd(at)szrl(dot)net
Website: www(dot)szrl(dot)net
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents