200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:33:04 GMT
HS code 39100000
MOQ 200kgs
color white
Model No E625
features liquid
shelf life one year
normal packing 25kg/drum
delivery within 3 days
demould time ` 2-4hours
mix ratio` 1:1
Min Order200 kilogram
high quality addtion silicone rubber moldmaking application:
E620 is a kind of liquid silicone rubber.It's liquid with moderate viscosity and can be poured and brushed.The mold made out of the silicone and curing agent,which with high temperature up to 250-300°C,has dimension stability,low linear shrinkage.It’s a two-component material with mixing ratio of 10:1,and it’s used for soft mold making,etc.
OPERRATING INSTRUCTION of HY-E-620 high quality addtion silicone rubber moldmaking :
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumize , you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Models of high quality addtion silicone rubber moldmaking
Model | E615 | E620 | E625 |
Appearance | Translucent | Translucent | Translucent |
Mixing Ratio | 1: 1 | 1: 1 | 1: 1 |
OperateTime(Mins25° C) | 2~3 | 2~3 | 2~3 |
CuringTime (Mins 25° C) | 30 | 30 | 30 |
Hardness (A° ) | 15± 2 | 20± 2 | 25± 2 |
Density ( g/cm 3 ) | 1.08 | 1.08 | 1.08 |
Viscosity (CS) (Part A) | 10000 ± 2000 | 20000 ± 2000 | 22000 ± 2000 |
Viscosity(CS)(Part B) | 5000 ± 500 | 5000 ± 500 | 4000 ± 500 |
Viscosity (CS) (After mixed) | 12000 ± 2000 | 12000 ± 2000 | 10000 ± 2000 |
Tensile-strength( kgf /cm 2 ) | 35± 5 | 46± 5 | 44± 5 |
Tear-strength (kgf /cm ) | 10± 2 | 11± 2 | 12± 2 |
Elongation-break(%) | 430 ± 50 | 460 ± 50 | 490 ± 50 |
Retractility(%) | ≤ 0.1 | ≤ 0.1 | ≤ 0.1 |
Any question about high quality addtion silicone rubber moldmaking , pls free to ask Ms Maggie.
Mobile: 0086-18938867501
Tel: 0086-755-89212380
Fax: 0086-755-89948030
E-mail: szsd(at)szrl(dot)net
Website: www(dot)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.