Sell HONGYE additional silicone rubber for HIGH PRECISION Architectural molds

                      Sell HONGYE  additional silicone rubber 

                for HIGH PRECISION  Architectural molds

Additional silicone rubber could use for high precision  Architectural molds ,

Also Some of the materials you can cast into a silicone mold are:

Urethane Plastic

Urethane Rubber (sold in store)

Epoxy

Polyester

Fiberglass Resign

Plaster

Soap

Wax

Low melt metals (up to 400 degrees Max)

HydroCal White

UltraCal 30

Hydrocal, Hydrostone

Cement, Concrete

AND

Using Instructions:

1. Applicable to the injection molding process
2. Mixing component A with B evenly according its mix ratio, it is ready for use after degassing , it cures by heating up the temperature when pouring into the mold.
3. The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness

Package and storage precautions:

1.The material is packed in 20kg per drum.

2. It is non-dangerous goods, should be stored at a cool and dry place, keep from sun and rain.

3.The service life is 12 months, it can be used after reinspection when exceeding time limits.

4.It is forbidden to mix with organic compounds of condensation cure silicone rubber, otherwise, the silicone rubber will not cure or vulcanize. It also should keep from organic compounds containing S,P,N, and metal salt of organic acid which causing silicon not cure or unvulcanized.

Any further information required ,pls feel free to contact Miss Samina and call the mobile of 0086-18938867533 or the phone 0086-755-89212365. Welcome to visit www(dot)szrl(dot)netanytime .