200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE610silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:33:47 GMT
Model E610silicone rubber
Appearance Translucent
Hardness(shore A) 42±2
Mix ratio(A:B) 1:1 or 10:1
MOQ 200kg
Payment T/T L/C Western union
Port shenzhen
HS Code 39100000
Min Order200 kilogram
Addition cure food grade silicone rubber for mold making Description
Addition cure food grade silicone rubber for mold making is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA molds application.
Addition cure food grade silicone rubber for mold making Applications,
Addition cure food grade silicone rubber for mold making could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Addition cure food grade silicone rubber for mold making Technique Data of HY-E610# molding silicone
Model | HY-E610# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 8-10 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 5000±3000 |
Tensile-strength( kgf /cm2 ) | >10 |
Tear-strength (kgf /cm2 ) | > 2 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
Addition cure food grade silicone rubber for mold making OPERRATING INSTRUCTION of HY-E610# molding silicone:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Addition cure food grade silicone rubber for mold making SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Addition cure food grade silicone rubber for mold making PACKAGE:Packed in clean 20kg/pail, 200kg/pail.
Any more information about silicone rubber, pls feel free to contact Bella at any time.
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: www (dot) szrl (dot) net
Email:hysi(at)szrl(dot)net
Skype: bellajiaqi
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.