200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE625#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:38:27 GMT
Sample Free
curing agent 1:1
Certification SGS,MSDS,RoHS,FDA
Material 100% silicone
Classification Chemical Auxiliary Agent
Chemical Auxiliary Agent Fluid
Appliacation Food grade moulding silicone for casting
HS code 39100000
Port shenzhen
Min Order200 kilogram
Addition cure silicone rubber application:
Addition cure silicone rubber,Food grade moulding silicone for casting is suitable for the molding for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.some of the materials you can cast into a silicone mold are: Urethane Plastic,Urethane Rubber,Epoxy,Polyester,Fiberglass Resign,Plaster,Soap,Wax,Low melt metals (up to 400 degrees Max),HydroCal White,UltraCal 30,Rigid Foam,concrete statue mold.
Addition cure silicone rubber specification:
Addition cure silicone rubber,Food grade moulding silicone for casting are generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1.
Addition cure silicone rubber feature:
1. Two-component silicone rubber with platinum catalyst
2. Simple mixing ratio with 1:1 dosage
3. With high transparency, tensile strength, and tear strength.
4. Nontoxic & reach to Food grade
5. With good heat stability and weather ability ( temperature resistant range of -60-250 C)
6. With heat-ageing resistance
Addition cure silicone rubber picutre show:
Addition cure silicone rubber datasheet:
Model | E625# |
Appearance | Translucent |
Mixing Ratio | 10:1 |
Operating time (Mins 25°C) | 30 - 45 |
Curing time (Hrs 25°C) | 4-8 |
Hardness (A°) | 25 |
Density ( g/cm 3 ) | 1.1 |
Tensile-strength( Psi ) | 550 |
Tear-strength (Pli ) | 80 |
Elongation-break(%) | 500±50 |
Addition cure silicone rubber operation way:
1.The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 1 part A and 1 part B,mix themevenly.
3.Vacuum defoaming in 1~3 min,inject the rubber into the type box, then vacuum defoaming again, curing 24 hours in nature room temperature, use it after demold.
4. Demold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.
Addition cure silicone rubber shelf life:
Ten (10) months from date of shipment when stored at 24°C in original unopened packages.
Addition cure silicone rubber package:
Packed in clean 20kg/pail, 200kg/pail.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me email by scanning 2 Dimensional Bar Code below:
Certification of Addition cure silicone rubber:
Our factory:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.