100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelE635
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:39:10 GMT
color translucent
Certifications: RoHS.SGS ISO9001:2000
HS CODE 39100000
Application mold making
shelf life 1 year
appearance liquid
MOQ 200kg
sample availlable
Min Order100 kilogram
Description
HY- E635 RTV-2 liquid platinum silicone rubber is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability. The
mixing ratio is 1:1,mainly be suitable for making molds application.
Applications
HY- E635 RTV-2 liquid platinum silicone rubber could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
Advantage
-low shrinkage (less than 0.1% )
-high tensile and tear strength with high copy times
-easy for operation (mixing ratio at 1:1 /10:1)
-good fluidity easy for pouring operation ( in round 10000 cps )
-it is food grade with FDA
Datasheet:
Product | E-625 | E-630 | E-635 |
Appearance | Translucent | Translucent | Translucent |
Hardness(shore A) | 25±2 | 30±2 | 35±2 |
Mix ratio(A:B) | 1:1/10:1 | 1:1/10:1 | 1:1/10:1 |
Viscocity Part A(mPa.s) | 27000±2000 | 25000±2000 | 30000±2000 |
Viscocity Part B(mPa.s) | 3500±500 | 2400±500 | 6000±500 |
Tensile strength (kgf/cm2) | 48±5 | 50±5 | 65±5 |
Tear-strength (kN/m) | 22±2 | 18±2 | 16±2 |
Elongation(%) | 500±50 | 450±50 | 450±50 |
Pot life/working time (mins) | 30-40 | 30-40 | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) | 3-4hrs(25°C) 110-20mins(60°C) | 3-4hrs(25°C) 1 110-20mins(60°C) |
Shrinkage rate (%) | 0.1% | 0.1% | 0.1% |
Operation instruction of HY- E635 RTV-2 liquid platinum silicone rubber :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
More information , pls feel free to contact Mr Allen:
e-mail: hyje(at)szrl(dot)net
Tel:86-755-89948006
skype: allen.zhou01
Mobile;86-18682484160
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.