RTV Addition Cure Silicone
- US $7.20
200 - 40,000 kilogram
- US $5.90
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E630#Silicon Rubber for Building Decoration Mou
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 18:41:17 GMT
Paramtents
sample free
application for Building Decoration Mould Making
color transparent
Mix ratio 1:1
status liquid
HS code 39100000
shelflife 12month
Packging & Delivery
Min Order200 kilogram
Briefing
2resist to weather, temperature, aging, acid, alkali
3high duplication times
Detailed
Rtv 2 Liquid silicone rubber for tyre moulds
1)Characteristics of rtv silicone rubber for tyre moulds
*low shrinkage (less than 0.1% )
**easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*high tensile and tear strength with high copy times
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
2)Description of rtv silicone rubber for tyre moulds
HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
3)Typical Applications of rtv silicone rubber for tyre moulds
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
HY-E620 Silicone Rubberis has been used for years to make tire pattern molds .
4) Technical Parameters of rtv silicone rubber
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
Any question about car moulding silicone rubber please feel free to contact Sarah:0086-18938867506
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents