platinum cure liquid Silicone Rubber for decorative Candle casting

platinum cure liquid Silicone Rubber for decorative Candle

Description of platinum cure liquid  silicone rubber for wax&candle casting

HY- E620# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making  masks, arms, legs, and other FDA molds application.

Applications of food grade molding silicon rubberfor wax&candle casting ,

HY- E620# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, cake molds,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E620#  of platinum cure silicon rubberfor wax&candle casting

OPERRATING INSTRUCTION of HY-E620# of platinum cure silicone rubber for wax&candle casting :

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 25kg/pail, 200kg/pail.

Any questions of silicone rubber for mold making, please feel free to contact Sarah:

86-18938867506

Skype:sarah_szrl