200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE635
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:55:15 GMT
Certification SGS,MSDS,RoHS
Hardness 18-40A
Mixing Ratio 1:1
Type liquid silicone
Appearance Fluid
Application Addition silicone rubber for plaster cornice mold making
EINECS No 39100000
Purity 100%
Port shenzhen
Sample free
Min Order200 kilogram
Addition silicone rubber for plaster cornice mold making applications:
Addition silicone rubber for plaster cornice mold making is mainly applied for making various molds:concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.soaps, candle & lighting.
Addition silicone rubber for plaster cornice mold making feature:
1) low shrinkage
2) good operation
3) high tear and tensile strength
4) curing agent free
5) easy de-mold
6) high reproduction times
7) resistance to deformation and high-temperature, acid-alkali
Addition silicone rubber for plaster cornice mold making picture show:
Addition silicone rubber for plaster cornice mold making datasheet:
Item No | Color | Hardness (A°) | Viscosity (CS) | Tensile-strength( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing Ratio of silicone and catalyst | Application(most for resin, gypsum and cement product to make moulds) |
E635 | Translucent | 35±2 | 8000±2000 | ≥60 | ≥13 | ≥400 | 1:1 | Most suitable for medium sized product |
Addition silicone rubber for plaster cornice mold making operations:
Step One: Take 100g of part A and add 100g of part B and mix the silicon rubber and the curing agent evenly.
Step Two: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.Step Three to use E642#: Brushing cast & Perfusion Molding operation.
Addition silicone rubber for plaster cornice mold making FAQ:
It should deal apart according to the size of the products, In principle, the hardness of the silicone should be according to the size of the products. If the products features small size and detailed patterns on it, the soft silicone can be applicable which the shore A should be 15-20 for easy demoulding and not damage of the patterns. Other wise harder silicone should be needed for large size products, such as products with size 1meter will need harder silicone with 35-40 shore A , then no-deformation. If Large products but features detailed patterns then 30 shore A silicone will be workable.(The process should be a layer silicone add a layer fiber glass or cloth..).The outer of mold can be plaster, glass fiber reinforced plastic(unsaturated resin and fiber glass) to protect the products from deformation.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
Addition silicone rubber for plaster cornice mold making certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
Addition silicone rubber for plaster cornice mold making package:
Packed in 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
Addition silicone rubber for plaster cornice mold making equirement:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.