100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelRTV 625#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:56:25 GMT
Available color white,transparent
Certifications RoHS.MSDS.SGS ISO9001:2000
Operation way brushing
Hardness 25 shore A
Curing time 4-5 hours
Mixing proportion of curing agent 100:4
Operating time 40-50
Viscosity (MPas -25 0C) 18000±2000
Tensile-strength(kgf /cm2 ) ≥36
Min Order100 kilogram
1. Applications of RTV Silicon for Toys Mould Making
RTV Silicon for Toys Mould Making is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
2. Features of RTV Silicon for Toys Mould Making
Flowable liquid silicon and curing agent.
Cures at room temperature within 5-46hours.
An exceptional fluidity and good operability.
Good Temperature and deformation resistance as well as low shrinkage.
High duplication times.
3. Datasheet of RTV Silicon for Toys Mould Making
Model | Our625# A/B | Smooth-on Mold Max ® 25T | E625# | Mold Max® Silicones 25 | E620# |
Mixing proportion of catalyst(%) | 100:5 | 100:5 | 1:1 | 10:1 | Translucent |
Hardness (A°) | 23~25 | 25 | 25 ± 2 | 25 | 1:1 |
Density ( g/cm 3 ) | 1.12 | 1.18 | 1.08 | 1.18 | 20-30 |
Viscosity (25 C°,mPa.s) | 17 000—19 000 | 25,000 | 6000 ± 2000 | 25000 | 2-3h |
Tensile strength (Mpa) | 40±5 | 40 | 50±5 | 40 | 20±2 |
Tear-strength (KN/m ) | 25±2 | 23 | 25±2 | 14.5 | 1.08 |
Elongation-break(%) | ≥ 400 | 375 | 380 ± 50 | 375 | 6000 ± 2000 |
Working time (minutes) | 30~60 | 45 | 20~30 | 60 | 25 ± 2 |
Curing Time (hours) | 12~24 | 24 | 2~3 | 24 | 20 |
Liner shrinkage (%) | ≤0.3 | 0.2 | ≤0.1 | 0.1 | 380 ± 50 |
|
|
|
|
| ≤0.1 |
4.Frequently asked questions of RTV Silicon for Toys Mould Making
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: Adding too much silicone oil which will destroy the molecular of silicone rubber; Making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; Making the mold for large products with soft silicone rubber which will rduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-8912382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.