200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-642# Silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:59:56 GMT
colour accorfing to customers requirements
certificates FDA SGS RoHS
sample free
application prototyping making
status liquid
HS code 391000000
original place China
shelflife 12month
grade food grade
Min Order200 kilogram
Platinum Silicone rubber For Making Fast, Clear Cut Mold ( HY- E642# Addition Molding Silicone)
Description of rapid prototyping platinum silicone rubber
HY- E642# addition molding silicone is generally named two-component silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making FDA molds application.
Applications of rapid prototyping platinum silicone rubber ,
HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, prototyping, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of rapid prototyping platinum silicone rubber HY-E642# molding silicone
Model | HY-E642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30-50 |
Curing time (Mins 25°C) | 3-4h |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | >15 |
Elongation-break(%) | 350 ± 50 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of rapid prototyping platinum silicone rubber HY-E642# molding silicone:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail, 200kg/pail.
Anymore information about Molding Silicone Rubber for Polyresin Crafts(HY-642#), please feel free to contact Ms Sarah .
Tel: 0086-755-89948013
Cell: 0086-18938867506
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.