Addition cure silicone rubber for gypsum column manufacturer

Application of Addition cure silicone rubber for gypsum column:

Addition cure silicone rubber for gypsum column is suitable for the molding for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.some of the materials you can cast into a silicone mold are: Urethane Plastic,Urethane Rubber,Epoxy,Polyester,Fiberglass Resign,Plaster,Soap,Wax,Low melt metals (up to 400 degrees Max),HydroCal White,UltraCal 30,Rigid Foam,concrete statue mold.

Feature of Addition cure silicone rubber for gypsum column:

RTV-2 Addition cure silicone rubber for gypsum column is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The

mixing ratio is 1:1,mainly be suitable for making molds application.

Advantage of Addition cure silicone rubber for gypsum column:

almost nil shrinkage

high chemical resistance to aggressive components of some types of resins

good tear strength (this feature ensures higher resistance to wearing and shearing) 

high degree of precision in reproduction 

high dimensional stability over time and  non-deformability 

high resistance to high temperatures and ageing (resit to -60-200°C) 

excellent non-stick effect 

environmental, odorless and nontoxic

Picture of Addition cure silicone rubber for gypsum column:

Datasheet of Addition cure silicone rubber for gypsum column:

Operation of Addition cure silicone rubber for gypsum column:

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Certification of Addition cure silicone rubber for gypsum column:

ISO9001: HK05/01358

SGS:GZ0606100461/CHEM

RoHS:BTRS091718751

Patent:ZL200520001597.8

Need any help on silicone rubber, please feel free to contact Ms Kitty:

Tel:86-755-89948294

Mob:86-18938867593

E-mail: hysh(at)szrl(dot)net  

Skype:kity-467707861

You can also send me e-mail by scanning 2 Dimensional Bar Code below:

Certification of Addition cure silicone rubber for gypsum column:

 About us:

We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers, special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulants and potting compound,addition cure liquid silicone,baby nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber, HTV silicone rubber, lead-zinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, RTV-2 silicone rubber, silicone molds, silicone products,etc.