casting mould 2 parts liquid FDA addition silicone
- US $18.88
200 - 40,000 kilogram
- US $8.88
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E642 silicone rubber
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 19:05:34 GMT
Paramtents
certificate ROHS,SGS,ISO9001:2000
Colour translucent
HS code 39100000
MOQ 200kgs
features liquid
sticker available
type condensation addition
Model E610 E630 E642
Packging & Delivery
Min Order200 kilogram
Briefing
2.for Mold making
3.1:1 simple mix
3.Low shrinkage
4.FDA certificate
Detailed
casting mould 2 parts liquid FDA addition silicone
casting mould 2 parts liquid FDA addition silicone Description
casting mould 2 parts liquid FDA addition silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
casting mould 2 parts liquid FDA addition silicone Applications
casting mould 2 parts liquid FDA addition silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
casting mould 2 parts liquid FDA addition silicone Technique Data
Model | HY-E642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 40 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 20 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of casting mould 2 parts liquid FDA addition silicone HY-E642# molding silicone:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
5.Datasheet of casting mould 2 parts liquid FDA addition silicone
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
E635# | transparent | 1: 1 | 20-30 | 2-3 | 35±2 | ≥ 93±2 | ≥ 16±2 | 10000±2000 | ≤0.1% | ≥490% |
E642# | transparent | 1: 1 | 20-30 | 2-3 | 42±2 | ≥ 103±2 | ≥ 15±2 | 10000±2000 | ≤0.1% | ≥35 |
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
Need any help on silicone rubber, please feel free to contact Ms Annie :
Tel: 0086-0755-89948294
Mob:0086-0755-18938861891
E-mail: hyjx(at)szrl(dot)net
skype: annie2012a
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents