200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE625#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:09:49 GMT
color Translucent
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring
hardness 25 shore A
shrinkage low shrinkage
visicosity low visicosity
deformation no deformation
elasticity good elasticity
duplication times high duplication times
Min Order200 kilogram
Description of Platinum Cure Silicon Rubber for Foodstuff Mould Making :
Platinum Cure Silicon Rubber for Foodstuff Mould Making is generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1.
It can be used for
1) cake mould making
2) candy mould making
3) chocolate mould making
4) cookies mould making
5) bake mould making
How to making silicone molds with Platinum Cure Silicon Rubber for Foodstuff Mould Making
1). Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping.
(If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2). Enclose the product (the original model) with four plastic plates or wooden plates.
3). Clean your products and brush a layer of release agent (detergent or soap water) on your product.
4). Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Datasheet of platinum cure silicone rubber from Hongye Silicone
Product | E-615 | E-620 | E-625 | E-630 | E-642 |
Appearance | Translucent | Translucent | Translucent | Translucent | Translucent |
Hardness(shore A) | 15±2 | 20±2 | 25±2 | 30±2 | 40±2 |
Mix ratio(A:B) | 1:1 | 1:1 | 1:1 | 1:1 | 10:1 |
Viscocity Part A(mPa.s) | 9000±2000 | 11000±2000 | 12000±2000 | 12500±2000 | 15000±2000 |
Viscocity Part B(mPa.s) | 1900±500 | 1900±500 | 1800±500 | 2400±500 | 100±50 |
Tensile strength (MPa) | 6.2 | 6.5 | 6.7 | 7.2 | 7.6 |
Tear-strength (kN/m) | 25 | 26 | 23 | 24 | 22 |
Elongation(%) | 569 | 581 | 480 | 440 | 450 |
Density | 1.05 | 1.05 | 1.07 | 1.13 | 1.14 |
Pot life/working time (mins) | 30-40 | 30-40 | 30-40 | 30-40 | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 20-30mins(60°C) | 6-8hrs(25°C) 30-50mins(60°C) |
Shrinkage rate (%) | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
Any questions of Silicone Rubber, please feel free to contact Miss Leah:
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.