200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE-635 series
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:12:17 GMT
Color translucent
Purity 100%
Application mold making for food
Sample Free
Technical support Free
Certifications SGS,MSDS,RoHS,FDA
HS CODE 3910 0000
Transportation By sea or by air
brand hongye
MOQ 200kgs
Min Order200 kilogram
platinum cure silicone rubber for architectural stone mold
Description
E-635 platinum cure silicone rubber is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability. The
mixing ratio is 1:1,mainly be suitable for making molds application.
Applications
E-635 platinum cure silicone rubber could be mainly used for food mold , such as chocolate mold , cake mold , it is also used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding .
Advantage
-low shrinkage (less than 0.1% )
-high tensile and tear strength with high copy times
-easy for operation (mixing ratio at 1:1 /10:1)
-good fluidity easy for pouring operation ( in round 10000 cps )
-it is food grade with FDA
Datasheet:
Product | E-635 |
Appearance | Translucent |
Hardness(shore A) | 35±2 |
Mix ratio(A:B) | 1:1 |
Viscocity (mPa.s) | 12000±2000 |
Tensile strength (kgf/cm2) | 50±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | ≤0.1% |
Operation instruction of E-635 platinum cure silicone rubber :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
More information , pls feel free to contact Mr Allen:
e-mail: hyje(at)szrl(dot)net
SKYPE: allen.zhou1
Tel:86-755-89948006
Mobile;86-18682484160
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.