200 - 40,000 kiloampere
40,001 - 999,999 kiloampere
group nameelectronic potting silicone rubber
Min Order200 kiloampere
brand nameHong Ye silicone rubber
model9055
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:14:11 GMT
color Black or grey
mixing 1:1
sample available
operation way pouring
feature good fluidity
feature 1 sealing
feature 2 bonding
feature 3 heat conductive
feature 4 easy for operation
feature 5 technical service provided
Min Order200 kiloampere
Silicone rubber for Potting compound
Typical Application of silicone rubber for potting compound
9055 is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Product Feature
silicone rubber for potting compound can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage.
l Room temperature vulcanize, and easy to operate;
l Maintain flexibility at a wide temperature range, and excellent insulation performance;
l Waterproof, moisture-proof, mouldproof, dustproof, and stable components;
l Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.
The appearance can be adjusted by our technical department if required.)
TECHNICAL GUIDELINES for Silicone rubber for Potting compound 1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Warm Tips for silicone rubber for potting compound :
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
l Condensation silicone which not completely cured or organic tin compounds
l Sulphur, sulfide and sulfur rubber materials.
l Amine compounds as well as contains the amine materials.
l Pewters solder flux.
2. The potting compound silicone Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
PACKAGE for silicone rubber for potting compound
20Kg/pail (Part A10Kg + Part B10Kg)
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
For more information about liquid silicone rubber, please feel free to contact with omiga
Mobile:86-18938867575
TEL: 86-0755-89948294
FAX: 86-0755-89948030
E-mail:hyjw(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.