200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
model9055#,9055#9301#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:24:14 GMT
Certification SGS,MSDS,RoHS
HARDNESS 55+/-5
Mixing Ratio 1:1
Type htv silicone rubber
Appearance Fluid
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
EINECS No 39100000
Purity 100%
Min Order200 kilogram
electrical conductivity silicone rubber Feature:
electrical conductivity silicone rubber for LED Displays And Lighting for good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
electrical conductivity silicone rubber Application
HY 9055 could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Using instruction of electrical conductivity silicone rubber
1. First stir the Part A completely before using(to be sure the segiment is evenly mixted) to mixing the Part B as Part A.
2. Mix the Part A and Part B completely according to the mix ratio(10:1by weight) and can be used after deaired
3.this product can be vulcanized at room temperature. After basic curing then go to the next step.Full curing process will be within 24h.The enviromental temperature, especially the humidity, will affect the curing time greatly. Customers should make appropriate adjustments acording to local conditions. The mixed silicone should be finished at one time to avoid any waste of material.
electrical conductivity silicone rubber Notes:
1.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
2. HY 9055 electrical conductivity silicone rubber should be sealed storage.The mixture should be used up disposably to avoid causing waste.
3. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
Packaging, storage and transportation of electrical conductivity silicone rubber (1) The product is vacuuming packed with 20kg/drum A.2kg/drum B.
(2) The product should be stored in a cool dry place, avoid the sun and rain, it must be kept away from acids, alkalis, salts and other compounds. The shelf life is one year from the date of production under 25 °C,and it can be re-used through a re-examination even If over its storage period.
(3) The goods is NOT subject to IMDG except the curing agent.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.