Electronic Potting Compound silicone

Electronic Potting Compound silicone 9055

Typical Application of Electronic Potting Compound silicone:

HY9055 is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

Product Feature of Electronic Potting Compound silicone :

It can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage.

Room temperature vulcanize, and easy to operate;

Maintain flexibility at a wide temperature range, and excellent insulation performance;

Waterproof, moisture-proof, mouldproof, dustproof, and stable components;

Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.

Technical Parameters of Electronic Potting Compound silicone:

(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.
The appearance can be adjusted by our technical department if required.)

TECHNICAL GUIDELINES of Electronic Potting Compound silicone:

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm Tips of Electronic Potting Compound silicone:

1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.

l         Condensation silicone which not completely cured or organic tin compounds

l         Sulphur, sulfide and sulfur rubber materials.

l         Amine compounds as well as contains the amine materials.

l         Pewters solder flux.

2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
   

PACKAGE
20Kg/pail (Part A10Kg + Part B10Kg)

SHELF LIFE AND TRANSPORTATION

1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.

2. This kind of product is non-dangerous product, it can be transported as general chemicals.

3. Products exceed the storage life should be confirmed normal before using.

Any more information about the Electronic Potting Compound silicone , please contact with Miss Caroline at any time:

Tel: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net