200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelsoft silicone sealant 9301
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:29:58 GMT
Color Black
Certificate UL94-V0
Package Vacuum Pumping
Shelf Life 12 months
Application For electronic potting
MOQ 200 kg
delivery within 3 days after payment
payment terms T/T, L/C
Min Order200 kilogram
soft silicone sealant 9301 for potting
Product Feature of soft silicone sealant 9301 for potting
RTV-2 Silicone sealant is a newly insulating materialsilicon of silicon compounds.
It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Features of soft silicone sealant 9301 for potting
Room temperature vulcanize, and easy to operate;
Maintain flexibility at a wide temperature range, and excellent insulation performance;
Waterproofing, moisture-proof, mouldproof, dustproof, and fixed components;
Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.
Typical Application of soft silicone sealant 9301 for potting
9301 is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters of soft silicone sealant 9301 for potting
Before Curing | Appearence | Black Fluid |
Density(25°C g/ml) | 0.98±0.02 | |
Viscosisty(25°Ccps) | Part A 500±100:Part B:800±100 | |
Mixing Ratio | A:B=1:1(By weight) | |
Operating Time(25°C hr) | 5 | |
Curing time(80°C hr) | 0.5 | |
After Curing | Hardness(Shore A) | 0 |
Dielectric Strength(KV/mm) | 23 | |
Volume Resistance(Ω.Cm) | 1.0×10 15 | |
Permittivity(1.2MHz) | 3.0 | |
Temperature Resistence(°C) | -60~200 | |
Fire Resistance | UL94-V1 |
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.
The appearance can be adjusted by our technical department if required.)
Technical guidance of soft silicone sealant 9301 for potting
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Warm Tips of soft silicone sealant 9301 for potting
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
lCondensation silicone which not completely cured or organic tin compounds
lSulphur, sulfide and sulfur rubber materials.
lAmine compounds as well as contains the amine materials.
lPewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
PACKAGE of soft silicone sealant 9301 for potting
20Kg/pail (Part A10Kg + Part B10Kg)
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
If you want to know more information about the soft silicone sealant 9301 , please don't hesitate to contact with Miss Caroline at any time !
Tel: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.