electric conductive rubber silicone

electric conductive rubber silicone  

electric conductive rubber silicone  application 

electric conductive rubber silicone  is good used for LED display,  pixel tube for potting;

 DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

 for LED screen, Wind Power Generator, PCB substrate, etc.

  electric conductive rubber silicone Features

electric conductive rubber silicone has sticky viscosity, low shrinkage and non-corrosive.

electric conductive rubber silicone can be used for a long period at the temperature of -60~300 centigrade degree with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.

  electric conductive rubber silicone   operation instruction

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Mixing Ratio: part A: part B = 1:1

3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.

  electric conductive rubber silicone Notice

1. electric conductive rubber silicone free sample is avalible

2. electric conductive rubber silicone with Reach certificate is avalible

3. electric conductive rubber silicone with MSDS, RHOS, GSG are avalible

4. electric conductive rubber silicone with  1kg/tin, 5kg/tin are avalible

Features of Wacker 623 pad printing silicone for stamping pictures

a. good printing effects

b. fine quality

c. good resilience

d. without any impurity

2. pad printing silicone for stamping pictures application:

- Pad printing is primarily used for non-uniform, multidimensional products like a golf ball. Flat surfaces can be pad printed as well.
- Typical image sizes are less than 3" in diameter, but print sizes of 5" or larger can be achieved in special occasions.
- You can pad print a very wide range of substrates, including plastics, metals, glass, ceramic, vinyl, rubber, polypropylene, leather, acrylic, cotton, even food items and more. A pad printer is NOT a documentation printer but it can be used for printing on paper products, for instance paper cubes or napkins.

 Wacker 623 similar pad printing silicone data sheet

FOQ of the  Wacker 623 pad printing silicone for stamping pictures  

1. Why does the silicone pad can not drop oil well?

 During the process of manufacturing toys, the steel mold need to spray the release agent for every dozens of products, the first or second product exists lots of release agent on the surface regarding the mold having just sprayed with the release agent. It is very normal that the incomplete printing patterns of more than 2 in 10 plastic toys or products which are not sprayed with paint  may not drop ink well. If the product is directly taken for pad printing before being cleaned by the thinner, hence, the phenomenon just arises. 

Any more information abt electric conductive rubber silicone , pls feel free to contact Ms. Bella

 Mobile: 0086-18938867572 

Tel: 0086-755-89212380

Fax: 0086-755-89948030

Website: www (dot) szrl (dot) net

Email: hysi(at)szrl(dot)net

Skype: bellajiaqi