addition catalyst electronic potting silicone

Electronic  potting silicone Typical Application

- Potting for Protetion of general electronic Module.   

- Outdoor protection for LED screen. 

It is applicable to sealing, bonding, coating for electronic parts.

electronic  potting silicone Features:

It can be vulcanized under room temperature or high temperature with low viscosity, easy mixing and pouring, and it is applicable to bulk pouring with excellent electrical performance.    

TECHNICAL GUIDELINES FOR ELECTRONIC POTTING SILICONE

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm Tips for electronic potting silicone :

 
1.The following material may hinder the curing of the product, So pls apply after summary 

    experiment. When necessary, pls clean the application areas.  Condensation silicone which not 

    completely cured or organic tin compounds Sulphur, sulfide and sulfur rubber materials.   Amine 

    compounds as well as contains the amine materials. Pewters solder flux.
2. The electronic potting silicon erubber should be sealed storage.The mixture should be used up at

     once, avoid causing waste.

3. The electronic potting silicone rubber belongs to non-dangerous goods, but keep away from

    mouth and eyes.

4. When electronic potting silicone rubber gets stratified after a period of storage, Please mix the

    electronic potting silicone rubber evenly before using, it does not affect the performance

For getfurther information about our silicone product, PLS contact with Mr.Chris

Mobile:086-18664924452

TEL: 0086-755-89948006

Skype: chrisyao211