200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
model630# 638#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:50:07 GMT
Application RTV-2 mold making silicone rubber
Certification SGS,MSDS,RoHS
HARDNESS 35+/-5
Mixing Ratio 1:1
Port shenzhen
Appearance Fluid
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
EINECS No 39100000
Purity 100%
Sample free
Min Order200 kilogram
RTV-2 mold making silicone rubber Applications:
Silicone Rubber for Mold Making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts etc
RTV-2 mold making silicone rubber Description:
RTV Silicone Rubber for gypsum/concrete molding is a kind of flowable liquid silicone, the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-4 hours.
RTV-2 mold making silicone rubber Feature:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
RTV-2 mold making silicone rubber Picture Show:
RTV-2 mold making silicone rubber Datasheet:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
638# | white | 100 : 3 | 30 | 5-10 | 38 | ≥ 38 | ≥ 28 | 34000-36000 | ≤0.3% | 380% |
630# | white | 100 : 3 | 30 | 5-10 | 30 | ≥ 47 | ≥ 35 | 28000 | ≤0.3% | 430% |
RTV-2 mold making silicone rubber Frequent Asked Question:
Why does the silicone mold appear to be dry outside but wet inside?
Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified after absorbing moisture from the air. In order to provide a significant shelf-life for the silicon rubber, we will dry out the water in the silicon rubber.
Solution: Add 0.05% water into the silicon rubber and Stir over a low speed briefly when you use it.
To recommend suitable product for your application, we would be much appreciated to have your following information:
1. What is the material of your product?
2. What is the size of your product?
3. How do you make silicone mold, by pouring or brushing?
RTV-2 mold making silicone rubber Certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
RTV-2 mold making silicone rubber Package:
Our factory and equirement:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.