Electronic potting compound silicone rubber (Liquid)

Product Feature of Electronic potting compound silicone rubber (Liquid)  

HY-9060# is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of  PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.

Advantage of Electronic potting compound silicone rubber (Liquid)

Minimal or virtually no shrinkage, optimum dielectric properties, high dimensional stability, excellent adhesion and thermal cycling properties.

Two (2) component systems that harden at room temperature and have service temperatures between 100°C to 130°C.

One (1) and two (2) component heat cured systems that can resist temperatures up to 200°C.

Filled potting compounds containing inorganic ingredients that impart (1) Thermal Conductivity, (2) a Low Coefficient of Thermal Expansion, (3) Low shrinkage, (4) Fire Retardancy.

Typical Application of Electronic potting compound silicone rubber (Liquid) 

HY-9060# is suitable for

- high powered electronics, 

- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

It can be broadly used for LED screen back encapsulation, switch pack sealing and potting, Wind Power Generator, PCB substrate, etc.

Technical Parameters of Electronic potting compound silicone rubber (Liquid)  

(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)

TECHNICAL GUIDELINES of Electronic potting compound silicone rubber (Liquid)  

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.

4, The temperature influences the curing time of HY-9060#. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Suggested operation time and temperature. With temperature of 80~100°C, the silicone will cure in 15 minutes, while in 25°C room temperature, the silicone will cure around 8 hours.

Warm Tips of  Electronic potting compound silicone rubber (Liquid) 

1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.

lCondensation silicone which not completely cured or organic tin compounds

lSulphur, sulfide and sulfur rubber materials.

lAmine compounds as well as contains the amine materials.

lPewters solder flux.

2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix 9060 evenly before using, it does not affect the performance

Packaging Details:25kg/drum and 200kg/drum

Delivery Time:within 3 days after payment confirmed in our bank.

Payment Terms:L/C at sight, T/T, West Union

Supply Ability:8 Ton per Day

Storage and Shelf life: one year in cool dry place

If you have any questions with Electronic potting compound silicone rubber (Liquid),pls feel free to contact Ms Aimee

MSN: aimeezhou055722(at)hotmail(dot)com
Skype:aimee055722

Email:hysz(at)szrl(dot)net
Tel:0086-755-89948019
Mob: 086-18938867541
Trademanager:cn200039753