liquid silicone compound for solar (PV) panels
- US $10.28
200 - 40,000 kilogram
- US $8.98
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-9055# silicone rubber
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 19:55:22 GMT
Paramtents
Ratio 1:1
MOQ 200kg
Payment T/T L/C Western union
Package 25kg/drum 200kg/drum
FOB Price US$12.07-15.72
Color White Grey
Features Liquid
Hs code 39100000
Port shenzhen
Packging & Delivery
Min Order200 kilogram
Briefing
Low shrinkage
Favorable tension
No deformation
High temperature resistance
Detailed
liquid silicone compound for solar (PV) panels
Product Feature of liquid silicone compound for solar (PV) panels
HY-9055# is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Typical Application of liquid silicone compound for solar (PV) panels
HY-9055# is suitable for
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters
Features | Part A | Part B | |
Before Curing | Appearence | Gray Fluid | White Fluid |
Viscosisty(25°Ccps) | 3000±500 | 3000±500 | |
Operation features | Mixing Ratio | 1,1 | |
Viscosisty(after mixing) (cps) | 2500~3500 | ||
Operating Time(25°C hr) | 120 | ||
Curing time (min,25°C) | 480 | ||
Curing time(80°C hr) | 20 | ||
After Curing | Hardness(Shore A) | 60±5 | |
Thermal conductivity [W(m·K)] | ≥0.8 | ||
Dielectric Strength(KV/mm) | ≥25 | ||
Permittivity(1.2MHz) | 3.0~3.3 | ||
Volume Resisivity(Ω·cm) | ≥1.0×1016 | ||
linear expansibility [m/(m·K)] | ≤2.2×10-4 | ||
Fire Resistance | 94-V0 | ||
(Pls note, the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)
Warm Tips for liquid silicone compound for solar (PV) panels :
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
Condensation silicone which not completely cured or organic tin compounds
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9060 evenly before using, it does not affect the performance.
PACKAGE of liquid silicone compound for solar (PV) panels
20Kg/pail (Part A10Kg + Part B10Kg)
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
If you have any questions about liquid silicone compound for solar (PV) panels , please feel free to contact Ms. Bella:
Tel: 86-755-89948006
Mob: 86-18938867572
Fax:86-755-89948030
Email: hysi(at)szrl(dot)net
Skype: bellajiaqi
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents