Electronic Potting Silicone with Grey/ Red Color

Electronic Potting Silicone with Grey/ Red Color  

Applications & Features of Electronic Potting Silicone with Grey/ Red Color:

Electronic Potting Silicone with Grey/ Red Color  can be vulcanized under room temperature or high temperature with low viscosity, easy mixing and pouring, and it is applicable to bulk pouring with excellent electrical performance. It is applicable to sealing, bonding, coating for electronic parts.

Typical Application of Electronic Potting Silicone with Grey/ Red Color

- high powered electronics, 

- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

Electronic Potting Silicone with Grey/ Red Color Parameters:

Features of Electronic Potting Silicone with Grey/ Red Color

1. No toxicity, solventless, no odor or cure by-product.
2. Equal amount of mixing ratio, good fluidity, easy processing.
3. No significant exotherm or shrinkage during curing.
4. Flexible curing schedule, can be cured at room temperature (R.T.) or at elevated temperature.
5. Very stable to changes of temperature, stability over wide temperature range (-50 to 200 ^oC).
6. Good thermal conductivity.
7. Excellent dielectric properties for maintaining and protection of existing electrical insulation requirements.
8. Excellent weather resistance and waterproof property for protection from moisture and dust contamination.
9. Relative easier removal benefits to repair of electrical/electronic devices
10. Green environmental protection.

Using instruction of Electronic Potting Silicone with Grey/ Red Color :

1. Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2. Weight Ratio: part A: part B = 1:1

3. Deaeration the mixture under 0.08 MPa for 5 minutes.

4. operate accordingly to above technical form, When under too low temperature and thick layer of sealant, we suggest customers appropriately heat the mixture to accelerate vulcanization, such as 80~100°C

Packaging, storaging and transportation of Electronic Potting Silicone with Grey/ Red Color :

1. This product need to be packed in clean, dry and sealed steel cans or drums. Part A and B need to be packed seperately. Usually it is packed in 5kg/can, 20 kg/drum, or 200 kg/drum .

2. The product should be stored in a cool dry place, avoid the sun and rain,and kept away from fire and heat source.
3. The goods is NOT subject to IMDG.The shelflife is 18 months from the date of production.And it still can be used after expired, when retest to be qualified.

Storage of Electronic Potting Silicone with Grey/ Red Color  

The potting silicone rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.  

Package of  Electronic Potting Silicone with Grey/ Red Color  

5kg/drum, 20kg/drum and 200kg/drum
 

Need any help on silicone rubber, please feel free to contact Ms Annie :
Tel: 0086-0755-89948294    
Mob:0086-0755-18938861891
E-mail: hyjx(at)szrl(dot)net   
skype: annie2012a