RTV silicone rubber for sex toy mold making

                  Hot recommendation  ---- RTV silicone rubber for sex toy mold making  

Advantabge for RTV silicone rubber for mold making   

RTV silicone rubber for sex toy mold making operation   

1. Operation by machine or manually .

RTV silicone rubber for mold making operation

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container . 

2. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

3.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes  . (If there is no vacuum machine, pls pour the mixture carefully  and slowly down the side of the mold frame so that less bubbles caused) 

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the vacuumed mixture into the model frame from the side of the mold frame .

During operate the three impotant thing to pay attention :
  1. weigh theliquid silicone rubber and curing agent exatly .
  2. Stir theliquid silcone rubber and curing agent evenly .
  3.we should choose the right hardness to making diffirent size of product mold.

Certificate of RTV silicone rubber for mold making ( liquid )

SGS

ROSHS

FDA

ISO900 

REACH

Key words : silicon,rubber ,silicon rubber ,moulding,artificial stone ,pad printing machine ,silicones/silicone technology,platinum cure silicone , additon cure silicone .

Any other information needed , pls feel free to contact Shirley 

Tel:0086-755-89948019

mobile: 0086-15220170905/18938867596

Or mail:hyh(at)szrl(dot)net

Welcome to our website www dot szrl dot net