Soft Liquid Addition Cure Molding Silicone

Applications of Soft Liquid Addition Cure Molding Silicone

Soft Liquid Addition Cure Molding Silicone could be mainly used for making concrete stone molds, garden statue molds, statue molds, stone mold, concrete statue mold, candle mold, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

 Features of Soft Liquid Addition Cure Molding Silicone

a. silicone rubber for art craft molding with SGS and ROSH approval

b. Curing agent arrange together as free charged

c.In liquid form and in various colors

d. With an exceptional fluidity and good operability

e.Temperature and deformation resistance as well as low shrinkage

f. High duplication times.

g. Sample orders are available

OPERRATING INSTRUCTION of HY-E600# molding silicone:

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE: Packed in clean 20kg/pail, 200kg/pail.

Any questions about Silicone Rubber, Leah is at your service.

TEL: 086-755-89212382

FAX: 086-755-89948030

MOBILE: 086-189 3886 7561

Website: www(dot)szrl(dot)net

E-MAIL: hyji(at)szrl(dot)net

Skype: leahchou1214

QQ: 189 3886 7561