Lifecasting rtv silicone rubber for sex molds

Lifecasting rtv silicone rubber for sex molds

Description of Lifecasting rtv silicone rubber for sex molds  

Y-series addition molding silicone is generally named two-component silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.  

The mixing ratio is 1:1 (10:1), mainly be suitable for mold making, life casting, silicone products.

Typical Applications of Lifecasting rtv silicone rubber for sex molds

Y- Series addition molding silicone could be mainly used for making concrete Stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other FDA food product mold making, prototyping etc. Y-series Silicone Rubber has been used to life casting applications for years.

 Characteristics of Lifecasting rtv silicone rubber for sex molds    

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

Technical Parameters of Lifecasting rtv silicone rubber for sex molds

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)

Operation instruction of Y- Series molding silicone:

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Notice for Lifecasting rtv silicone rubber for sex molds:

As our Y-series silicone is platinum cure silicone , which is very easy to cause

cure inhibition , so pls do remember thoroughly clean the model and tool before

operation . Besides , pls avoid the liquid Y-series silicone contact or mix with the

following material , otherwise the silicone won’t be cured :

1. Liquid condensation silicone (condensation silicone not completely cured or organic

tin compounds )

2 .Sulphur, sulfide and sulfur rubber materials.

3. Amine compounds as well as contains the amine materials.

4 .Pewter solder flux.

SHELF LIFE of Lifecasting rtv silicone rubber for sex molds:

8-10 months when stored under 24°C in original unopened packages.

PACKAGE for Lifecasting rtv silicone rubber for sex molds:

If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.

Any more information of Lifecasting rtv silicone rubber for sex molds, please feel free to contact Bella

Mob: 0086-18938867572 

Tel: 0086-755-89948006

 Fax: 0086-755-89948030

 Email:hysi(at)szrl(dot)net

 Skype: bellajiaqi