good price of 100% platinum cured lifecasting silicone for bra pad

good price of 100% platinum cured lifecasting silicone for bra pad  

Typical Applications of platinum cured lifecasting silicone for bra pad 

Y- Series addition molding silicone could be mainly used for making concrete Stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other FDA food product mold making, prototyping etc. Y-series Silicone Rubber has been used to life casting applications for years.

Description of platinum cured lifecasting silicone for bra pad

Y-series addition molding silicone is generally named two-component silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1), mainly be suitable for mold making, life casting, silicone products.

 
Characteristics of platinum cured lifecasting silicone for bra pad   

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

Technical Parameters of platinum cured lifecasting silicone for bra pad

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)

Operation instruction of Y- Series molding silicone:

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Notice for platinum cured lifecasting silicone for bra pad :

As our Y-series silicone is platinum cure silicone , which is very easy to cause

cure inhibition , so pls do remember thoroughly clean the model and tool before

operation . Besides , pls avoid the liquid Y-series silicone contact or mix with the

following material , otherwise the silicone won’t be cured :

1. Liquid condensation silicone (condensation silicone not completely cured or organic

tin compounds )

2 .Sulphur, sulfide and sulfur rubber materials.

3. Amine compounds as well as contains the amine materials.

4 .Pewter solder flux.

SHELF LIFE of platinum cured lifecasting silicone for bra pad :

8-10 months when stored under 24°C in original unopened packages.

PACKAGE for platinum cured lifecasting silicone for bra pad :

If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.

Any more information of platinum cured lifecasting silicone for bra pad , please feel free to contact Bella

Mob: 0086-18938867572 

Tel: 0086-755-89948006

 Fax: 0086-755-89948030

 Email:hysi(at)szrl(dot)net

 Skype: bellajiaqi