200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLife casting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelY-810# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 20:40:17 GMT
MOQ 200KG
apperance fluid
Payment T/T L/C Western Union
operating time 30-40minutos
Classification Chemical Auxiliary Agent
certification: RoHS, Reach, MSDS,SGS.ISO9001:2008
Port Shenzhen
Mixing ratio 1:1
Curing time 12-24 hours
Features Liquid
Min Order200 kilogram
Typical Applications of Life casting rtv silicone rubber for sex molds
Y- Series addition molding silicone could be mainly used for making concrete Stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other FDA food product mold making, prototyping etc. Y-series Silicone Rubber has been used to life casting applications for years.
Description of Life casting rtv silicone rubber for sex molds
Y-series addition molding silicone is generally named two-component silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1), mainly be suitable for mold making, life casting, silicone products.
Characteristics of Life casting rtv silicone rubber for sex molds
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Technical Parameters of Life casting rtv silicone rubber for sex molds
Model | Appearance | Mixing Ratio | Operating time (Mins 25°C) | Curing time (Mins 25°C) | Hardness (A°) | Density ( g/cm 3 ) | Tensile-strength(kgf /cm2 ) | Tear-strength (kgf /cm2 ) |
Y 810# | Translucent/Skin | 1:1 | 10-15 | 60-90 | 10±2 | 1.08 | 35 ± 20 | 10 ± 2 |
(Please note: the above data for this product in 25°C temperature, 55% humidity conditions, for reference. The accurate data is measured by customers when using.)
Operation instruction of Life casting rtv silicone rubber for sex molds:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2. Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4. And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Notice for Life casting rtv silicone rubber for sex molds:
As our Y-series silicone is platinum cure silicone, which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before operation. Besides, pls avoid the liquid Y-series silicone contact or mix with the
following material , otherwise the silicone won’t be cured :
1. Liquid condensation silicone (condensation silicone not completely cured or organic
tin compounds )
2. Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
For more information about silicone rubber, please feel free to contact Christy.
Email: hyxj(at)szrl(dot)net
Mobile: 0086-18938867547
Skype: christyxu911
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.