200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLife casting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 20:47:05 GMT
appearance translucent
hardness 20
mix ratio 1.1
viscosity 11000
tensile strength 4.7
tear-strength 14+2
elongation 520
density 1.05
pot life 20-40min
technical support
Min Order200 kilogram
life casting silicone rubber
Y-series addition molding silicone is generally named two-component silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1), mainly be suitable for mold making, life casting, silicone products.
Applications of life casting silicone rubber
Y- Series addition molding silicone could be mainly used for making concrete Stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other FDA food product mold making, prototyping etc. Y-series Silicone Rubber has been used to life casting
Characteristics of life casting silicone rubber
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Operation instruction of Y- Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
packing of life casting silicone rubber
company of life casting silicone rubber
certification of life casting silicone rubber
For more information about liquid silicone rubber, please feel free to contact with omiga
Mobile:86-18938867575
TEL: 86-0755-89948294
FAX: 86-0755-89948030
E-mail:hyjw(at)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.