200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameinjection moulding silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
model924# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 20:52:28 GMT
Advantage high transparent, high tear strength. fast curing
Colour Transparent
Mixing Ratio 1:1
Grade Food Grade
Payment Term T/T , L/C
Delivery Time within 7 days
Sea Port Shenzhen
Application mold making
Packing 20KG/DRUM or 200KG/DRUM
Shelf life 12 months
Min Order200 kilogram
Datasheet of Injection molding silicone:
Model: Injection molding silicone
Appearance: Transparent/ High transparent
Mixing proportion of curing agent(%) 1:1
Operating time ( hours ): 20 seconds under 150 °c
Curing time( hours ): 30-50 seconds
Hardness (shore A): 10-80
Viscosity (Mpas): 30-120
Tensile-strength ( kgf /cm2 ): ≥35
Tear-strength (kgf /cm2 ): ≥20
Elongation-break(%): ≥ 500
Retractility(%): ≤0.1
HTV addition silicon rubber for Injection Baby Nipple
Model: HY-924#
Usage:
Injection molding for baby nipples, cake mold, medical catheter.
Description:
This is a grade liquid silicone rubber suitable for injecting moulding technique with high transparency, strength, and tear strength.
Silicone rubber Typical Properties:
The HY-924 is an injection molding liquid silicone rubber, which is an elastomer cured under high temperature, has the following excellent properties:
High transparency
Excellent tear strength(≥35N/mm)
Good resilience
Good heat stability and weatherability ( temperature resistant range of -60--250)
Anti-yellowing
Heat-ageing resistance
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Siilicone rubber Standard Datasheet:
Item | HY-924 | |
Appearance | transparent | |
Viscosity (Pa.S) | 700 | |
Density (g/cm3) | 1.12 | |
Hardness (A°) | 60 | |
Elongation at break (%) | 380 | |
Tear strength (KN/mm) | 35 | |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150 |
Any more information about Injection molding silicone,
pls feel free to email or call
Mr Chris
TEL: 086-755-89948019
FAX: 086-755-89948030
Mobile:86-189 3886 7508
Skype: chrisyao211
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.