200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameinjection moulding silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE-635# Silicone Rubber,E-635 silicone rubber for m
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:05:50 GMT
Certification SGS,MSDS,RoHS
HARDNESS 35+/-5
Mixing Ratio 1:1
Type silicone rubber for mold making
Appearance Fluid
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
EINECS No 39100000
Purity 100%
Min Order200 kilogram
RTV-2 injection moulding silicone for jewelry molds
RTV-2 injection moulding silicone for jewelry molds is a two-component liquid silicone rubber for injection molding processes. HY-2130 shows a higher productivity, less yellowing and low volatile contents. HY-2130 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
RTV-2 injection moulding silicone for jewelry molds Application:
Because of the outstanding properties,HY-2130 is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.
RTV-2 injection moulding silicone for jewelry molds Specification:
Vulcanisates consisting of HY-2130 are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Typical Physical Properties
Product | HY-2130 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 10:1 |
Viscocity Part A(mPa.s) | 60000±2000 |
Viscocity Part B(mPa.s) | 35000±500 |
Tensile strength (kgf/cm2) | 32±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
Processing Recommendations
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 10:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
SHELF LIFE:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
Any questions of RTV-2 injection moulding silicone for jewelry molds, please feel free to
contact Aaron:
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-18938867535
PIcture Showroom
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.