high transparent silicone for resin decrations injection mold making

FOB Price

US $11.50
200 - 40,000 kilogram
US $6.25
40,001 - 999,999 kilogram

group namesilicone rubber for textile coating& trademarks
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E620,E-620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:10:46 GMT

contact supplier

Paramtents

colour customized
features easy operate
certifications RoHS. MSDS.SGS ISO9001:2000
payment TT/LC
samples available
type manufacture
main market Europe ,Mid East,South Africa

Packging & Delivery

Min Order200 kilogram

Briefing

high transparent silicone for resin decrations injection mold making
1.flowability
2.low viscosity
3.high transparent

Detailed

high transparent silicone for resin decrations injection mold making

HY- E620# Addition Molding Silicone

Description of transparent silicone for resin decrations injection mold making

HY- E620# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA molds application.

Applications of transparent silicone for resin decrations injection mold making

HY- E615# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, cake molds,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Technique Data of HY-E620# transparent silicone for resin decrations injection mold making

Model	HY-E620#
Appearance	Translucent
Mixing Ratio	1:1
Operating time (Mins 25°C)	20-30
Curing time (Mins 25°C)	2-3h
Hardness (A°)	20±2
Density ( g/cm 3 )	1.08
Viscosity (CS)	6000 ± 2000
Tensile-strength( kgf /cm2 )	25 ± 2
Tear-strength (kgf /cm2 )	20
Elongation-break(%)	380 ± 50
Retractility(%)	≤0.1

Operation of HY-E620# transparent silicone for resin decrations injection mold making

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .